Connection and Processing Methods for Carbon Fiber Tubes
Leave a message
Methods for connecting carbon fiber tubes include epoxy bonding, molded carbon-titanium composite joints, and mechanical fastening (drilling). After epoxy bonding, residual resin can be removed using acetone; molded carbon-titanium joints require consideration of load-bearing characteristics and the structural design of the connector; mechanical fastening via drilling is challenging due to the high strength of carbon fiber tubes and carries a risk of causing the tube to crack.
When cutting carbon fiber tubes, diamond-coated abrasive blades should be used; toothed blades must be avoided, as they can snag fibers and tear the material, leading to delamination. The tube must be properly supported during cutting to prevent movement at the cut end, which could create burrs. For thicker tube walls, it is necessary to cool the cutting surface or the blade to minimize the risk of overheating due to friction; active cooling via wet sawing or the use of segmented blades is recommended. Common issues include delamination, overheating, and wear: delamination is prone to occurring when cutting unidirectional tubes, so cutting speed should be reduced; overheating is likely when cutting thick-walled tubes, requiring reduced speeds or the use of coolant; and wear often occurs when cutting aramid or carbon-aramid hybrid tubes, with edges requiring finishing using abrasive materials like sandpaper after the cut.






