Carbon Carbon Brake Disc
Carbon Carbon Brake Disc is a high-performance friction component fabricated with carbon fiber preform and carbon matrix via repeated densification and high-temperature graphitization processes. Compared with traditional cast iron brake rotors, C/C brake discs feature ultra-light weight, outstanding high-temperature resistance, stable friction coefficient under extreme braking loads, low wear rate and long service life.
Description
Carbon Carbon Brake Disc is a high-performance friction component fabricated with carbon fiber preform and carbon matrix via repeated densification and high-temperature graphitization processes. Compared with traditional cast iron brake rotors, C/C brake discs feature ultra-light weight, outstanding high-temperature resistance, stable friction coefficient under extreme braking loads, low wear rate and long service life. They eliminate thermal fading during continuous high-speed braking and greatly reduce unsprung mass for vehicles, effectively lifting acceleration, handling and fuel efficiency. Our C/C brake discs cover hypercar aftermarket refit, OEM original matching, motorsport racing, high-speed rail pantograph brake and aircraft landing braking systems. The material works reliably under harsh conditions including high heat, rapid temperature alternation and long-duration heavy load braking, widely recognized by performance car manufacturers, racing teams and railway & aviation maintenance enterprises worldwide.
PRODUCT DETAILS
Road-Going CCM Carbon-Ceramic Brake Disc (Aftermarket Refit & OEM Option)
- Structure: Long carbon fiber woven preform, silicon ceramic friction coating on both friction surfaces, floating split hub design
- Core merits: Quiet daily street braking, anti-corrosion against rain, snow and road salt, low brake dust generation
- Matching models: Porsche, BMW M, Mercedes AMG, Ferrari, Tesla ultra-performance EV, domestic new energy hypercars
- Application scenario: Daily commuting + occasional track day dual-use, mainstream high-volume aftermarket product
Pure C/C Racing Brake Disc (Circuit & Motorsport Exclusive)
- Structure: 3D orthogonal woven carbon fiber preform, no ceramic coating, pure carbon-carbon friction surface
- Core merits: Ultra-high thermal shock resistance, zero thermal fade under full-speed continuous braking, reusable after surface grinding
- Application scenario: F1, endurance racing, track club vehicles, high-displacement performance motorcycles
HSR Pantograph C/C Brake Disc (High Speed Rail Special)
- Structure: Short fiber needled C/C composite, customized thin-ring annular shape
- Core merits: Light weight, stable friction under frequent high-speed start-stop, long service cycle to cut railway maintenance cost
- Matching equipment: CRH series EMU, Fuxing high-speed train pantograph braking system
Aviation Aircraft C/C Brake Disc
- Structure: Multi-layer stacked 2.5D needled carbon-carbon composite, high strength against instantaneous landing high temperature
- Core merits: 3–5 times longer service life than steel brakes, drastically reduces aircraft weight for fuel saving
- Matching models: Civil passenger aircraft Boeing 737/787, Airbus A320/A330 series

PRODUCT PARAMETERS
|
Parameter |
Standard Specification |
|
Base Material |
Carbon fiber preform + carbon matrix composite |
|
Surface Type |
Ceramic coated (CCM) / Uncoated pure C/C |
|
Density |
1.6 ~ 1.9 g/cm³ |
|
Maximum Instant Operating Temperature |
1600 ℃ |
|
Continuous Stable Working Temperature |
≤ 800 ℃ |
|
Friction Coefficient (200–800℃) |
0.32 ~ 0.45 |
|
Weight Reduction vs Cast Iron Rotor |
60% ~ 70% lighter |
|
Service Life (Road CCM Disc) |
8–10 times longer than cast iron disc |
|
Service Life (Racing Pure C/C Disc) |
3–5 full race weekends (regrindable for reuse) |
|
Tensile Strength |
≥ 140 MPa |
|
Compressive Strength |
≥ 220 MPa |
|
Thermal Conductivity |
30 ~ 80 W/(m·K) |
|
Linear Thermal Expansion Coefficient |
≤ 1.2×10⁻⁶ /℃ |
|
Operating Environment |
Resist rain, snow, weak acid road medium; Avoid long-term strong oxidant soaking |
|
Custom Sizes |
330/350/380/400/420/440mm outer diameter; Custom thickness & mounting hole layout available |
Supplementary Notes
- Ceramic coated CCM discs are recommended for road legal vehicles to avoid abnormal noise and corrosion in daily use;
- Pure uncoated C/C discs are only suitable for track racing, not recommended for daily street driving;
- Custom preform structures (2D woven / 2.5D needled / 3D orthogonal woven) can be produced per client's load and temperature requirements.
Hot Tags: carbon carbon brake disc, China carbon carbon brake disc manufacturers, suppliers, factory, CFC bolt, CFC Fasteners, CFC for cemented carbide sintering, CFC Plate Manufacturer, CFC Spring Washer, Standard CCM Carbon Composite Disc
Send Inquiry
You Might Also Like











