Pan Carbon Cloth
PAN Carbon Cloth is a high-performance woven composite reinforcement material, made of qualified PAN (Polyacrylonitrile) based carbon fiber tow through professional loom weaving and surface sizing treatment. With uniform matte black appearance, stable fiber structure and no loose filaments, it retains the core advantages of carbon fiber: ultra-light weight, high tensile strength, high temperature resistance, corrosion resistance and fatigue resistance.
Description
PAN Carbon Cloth is a high-performance woven composite reinforcement material, made of qualified PAN (Polyacrylonitrile) based carbon fiber tow through professional loom weaving and surface sizing treatment. With uniform matte black appearance, stable fiber structure and no loose filaments, it retains the core advantages of carbon fiber: ultra-light weight, high tensile strength, high temperature resistance, corrosion resistance and fatigue resistance.
Different from ordinary fiber cloth, PAN carbon cloth features diverse weaving structures and complete industrial specifications. It can be perfectly infiltrated and compounded with epoxy resin, vinyl resin and other matrix materials. After curing and molding, it forms high-rigidity and high-strength carbon fiber composite parts. It is the most widely used basic material in lightweight manufacturing, aerospace, new energy, industrial reinforcement and high-end decoration fields.
PRODUCT DETAILS (Different Weave Type & Model Description)
Plain Weave PAN Carbon Cloth
Plain weave is the most conventional and stable carbon cloth structure, woven with one-up and one-down interlaced fiber arrangement. The fabric surface is flat, neat and symmetrical with uniform stress distribution, excellent structural stability and low deformation rate. This type of carbon cloth has tight weaving density, strong shear resistance and good moldability for flat and simple curved surfaces. It is suitable for industrial structural reinforcement, standard carbon fiber plate/tube production, equipment protection and conventional composite molding. It is the most cost-effective and versatile mainstream model for mass industrial production.
Twill Weave Carbon Cloth
Twill weave carbon cloth presents continuous diagonal texture lines with staggered fiber arrangement. Compared with plain weave, it has better softness, higher drapability and stronger fitting performance for complex curved surfaces and special-shaped parts. It is easy to fold and lay without dead folds, effectively improving the fitting degree of composite materials. With balanced strength and flexibility, it is widely used for automotive exterior parts, drone shells, sports equipment, curved mold parts and high-precision shaped composite products, taking into account both structural strength and beautiful appearance.
Satin Weave Carbon Cloth
Satin weave carbon cloth adopts long-span floating fiber weaving technology, with fewer interlacing points and smoother fabric surface. It has ultra-high flatness, delicate texture and excellent glossy finish after resin infiltration. This model features low friction coefficient, good air permeability and superior high-grade decorative effect. While ensuring basic mechanical strength, it greatly improves the appearance grade of finished products. It is mainly used for high-end luxury decoration, aerospace appearance parts, medical equipment shells and high-grade customized carbon fiber products with strict surface requirements.
Unidirectional Carbon Cloth
Unidirectional carbon cloth is professionally designed for unidirectional load-bearing scenarios. Most high-strength PAN carbon fiber tows are arranged in a single main force direction, with only a small number of auxiliary yarns for fixing and shaping. It features extremely high unidirectional tensile strength and tensile modulus, minimal lateral fiber loss, and concentrated mechanical performance. This cloth has low crimp rate, excellent straightness and stable stress transmission. It is widely used in industrial structural parts, mechanical reinforcement beams, wind turbine blade ribs and customized composite components that require extreme unidirectional strength.
Bidirectional Carbon Cloth
Bidirectional carbon cloth adopts balanced warp and weft fiber arrangement, with equal fiber density and consistent strength in both horizontal and vertical directions. Different from unidirectional cloth's single-direction strength advantage, bidirectional cloth achieves uniform force bearing in two directions, effectively solving the problem of directional strength weakness of single fiber arrangement. It has good integrity, strong anti-deformation ability and excellent comprehensive mechanical properties. Suitable for flat structural plates, pressure-resistant panels, building reinforcement, container lining and general industrial composite parts with bidirectional force requirements.
Multiaxial Carbon Cloth
Multiaxial carbon cloth is stacked and woven with multi-angle fiber layers (0°/±45°/90°), realizing omnidirectional stress resistance and solving the strength defect of single-direction and bidirectional fabric. It has high layer bonding strength, good impact resistance and anti-delamination performance. It is the core reinforcement material for high-load industrial components, wind energy blades, pressure vessels and aerospace bearing structural parts.
Unidirectional carbon cloth concentrates most fiber tow in a single direction, with extremely high unidirectional tensile strength and modulus, specifically designed for directional force-bearing structural parts. Multiaxial carbon cloth is stacked and woven with multi-angle fiber layers (0°/±45°/90°), realizing omnidirectional stress resistance and solving the strength defect of single-direction fabric. It has high layer bonding strength, good impact resistance and anti-delamination performance. It is the core reinforcement material for high-load industrial components, wind energy blades, pressure vessels and aerospace bearing structural parts.

PRODUCT PARAMETERS & FULL MODEL DATA TABLE
All models are made of pure PAN-based carbon fiber, complete specifications from light weight to heavy weight, covering industrial standard and high-end customized grades.
|
Model No. |
Weave Type |
Carbon Tow |
Weight (GSM) |
Thickness (mm) |
Width (m) |
Core Feature & Application |
|
PC-P100 |
Plain Weave |
12K |
100 |
0.10 |
1.0/1.27 |
Ultra-light, flat surface; for thin carbon plate, surface anti-corrosion reinforcement |
|
PC-P160 |
Plain Weave |
12K |
160 |
0.16 |
1.0/1.27 |
Stable structure, cost-effective; universal industrial standard model |
|
PC-P200 |
Plain Weave |
12K/24K |
200 |
0.20 |
1.0/1.27 |
High rigidity, strong shear resistance; for structural reinforcement and thick plate molding |
|
PC-T120 |
Twill Weave |
12K |
120 |
0.12 |
1.0/1.27 |
Good flexibility, easy lamination; for curved surface and auto parts |
|
PC-T200 |
Twill Weave |
12K/24K |
200 |
0.20 |
1.0/1.27 |
Balanced strength & ductility; widely used in sports & automotive industry |
|
PC-S160 |
Satin Weave |
3K/12K |
160 |
0.16 |
1.0/1.27 |
Super smooth surface, high gloss; high-end decoration & appearance parts |
|
PC-S240 |
Satin Weave |
12K |
240 |
0.24 |
1.0/1.27 |
High thickness & premium texture; customized luxury carbon products |
|
PC-U200 |
Unidirectional |
12K |
200 |
0.20 |
1.0/1.27 |
Ultra-high unidirectional strength; professional single-direction load-bearing structural parts |
|
PC-B200 |
Bidirectional |
12K |
200 |
0.20 |
1.0/1.27 |
Balanced warp & weft strength, bidirectional force resistance; general industrial flat structural parts |
|
PC-M300 |
Multiaxial |
24K |
300 |
0.30 |
1.0/1.27 |
Omnidirectional stress resistance; wind power, aerospace heavy-duty components |
CORE GENERAL PARAMETERS
| Base Material | 100% PAN Polyacrylonitrile Based Carbon Fiber |
| Surface Treatment | Professional sizing treatment, excellent resin wettability |
| Density | 1.75–1.80 g/cm³ |
| Tensile Strength | ≥3500 MPa |
| Temperature Resistance | Stable below 400℃ in air, above 2000℃ in inert atmosphere |
| Characteristics | Lightweight, high strength, corrosion resistant, fatigue resistant, easy to cut and mold |
| Processing Method | Hand lay-up, vacuum infusion, hot pressing, winding molding |
| Application Fields | Aerospace, automotive lightweight, new energy wind power, sports goods, industrial structural reinforcement, high-end decoration |
PRODUCT ADVANTAGES
1. Complete weaving types and full specification range, covering light, medium and heavy weight models to meet diverse molding needs;
2. Pure PAN carbon fiber raw material, uniform black texture, no impurity and no broken filaments, stable batch quality;
3. Different weave structures correspond to different performance advantages, realizing targeted selection for different application scenarios;
4. Excellent resin infiltration and bonding performance, effectively improving composite product toughness and anti-delamination ability;
5. Ultra-light and high-strength, greatly reduce equipment weight while ensuring structural safety, reducing overall operating cost.
Hot Tags: pan carbon cloth, China pan carbon cloth manufacturers, suppliers, factory, 12K PAN Carbon Fiber Tow, 3K Pan Carbon Cloth, 48K PAN Carbon Cloth, aerospace grade pan carbon fiber, Carbon fiber Rayon Precursor, PAN precursor filament
Send Inquiry
You Might Also Like











